GA 300 GM - 1001 GM single rotor rakes

GA 3200 machine silhouette

Several decades of proven reliability

GA 300 GM 3201 G/GM and GA 3801 models of single rotor rakes are ideal for small farms. Fitted with 9 or 10 tine arms, these rakes work at widths of 3.20 to 3.80m.

Find a dealer near you

These single rotor rakes have 9 to 10 tine arms attached to a fully enclosed single-stage gearbox. They are designed for small farms and low to medium hp tractors. These rakes work at widths of 3.20 to 3.80 m.
GA 3801 GM at work

Your benefits

Reliability and time savings

Maintenance free gearbox

Maintenance free gearbox

Tine arm drive components are housed in a fully enclosed gearbox casing and require no particular maintenance. The tine arm holders are fixed onto the upper and lower gearbox casing covers making them even more robust.

Tines made from heat treated steel

The tines rake the crop very gently, even when it is heavy and dense. They are made of heat treated steel so their service life is optimised and resistance to fatigue is increased. The “floating” tine attachment, featuring three large-diameter coils, also reduces the risk of wear. The tine height is tightly controlled to preserve both the stubble and the crop.
Tines made from heat treated steel

Top quality raking

Well formed swaths from GA 3801 GM with double-curved tines

Many tine arms

The 9 tine arms on GA 300 GM, GA 3201 G and GA 3201 GM models and the 10 tine arms on the GA 3801 GM enable the tools to rake across the whole width. Having a large number of arms is a requirement for top-quality raking. They are in a hyper-tangential position (except GA 300 GM and GA 3201). This means that they reach a 90° angle late in the turning cycle, tine clearance is quick and requires little rotational effort to produce regular, fluffy and straight swaths. The raking is of high quality even at high speeds because the forage is not pushed too far out past the swath.

Swath curtain to adjust the swath width

The swath curtain is mounted on a parallelogram (except GA 300) and is easily adjusted by turning a handle. When extended outwards, the curtain automatically moves to the rear and vice versa. This is very practical as it is always correctly placed in relation to crop flow. No tools are required to set the swath width.
GA 3801 GM at work

Stable on the road and in the field

The fixed headstock on the GA 3201 G

Headstock for unrivalled flexibility

GA 300 GM, GA 3201 GM and GA 3801 GM models are available with pivoting headstock so raking and swath quality when turning is just as good as on the straight. What's more, the following baler will be easier to handle in the corners.
If your fields are sloping, opt for the GA 3201 G. With its fixed hitch system the rake will always follow the tractor even on the steepest slopes. It is fitted with pivoting wheels too and there is a lever on the wheel to adjust the machine height.

Wheels positioned extremely close to the rotor

The wheels are positioned extremely close to the rotor. As a result the tines follow the ground contours better to avoid impurities getting into the forage.
GA 3801 GM at work

GA 3801 GM at work


Technical characteristics
Working width (m)
Average windrow width (m)
Windrow deflector
Transport width with arms disconnected/connected (m)
Windrow delivery
Guard unfolding and folding
Guard deployment
Number of rotors / Rotor diameter (m)
Number of tine arms per rotor / Number of tines per tine arm
Tine arms
Bogie axles
Wheel type
Raking height adjustment
Tyres on each rotor
Headstock stabilisers
Theoretical tractor power requirement (kW/hp)
Road lights and signalling
Approx. weight (kg)
GA 300 GM GA 3801 GM
3.20 3.80
0.80 1.00 - 1.30
Windrow screen Windrow curtain
- / 2.75 1.75 / -
To the left To the left
Manual Manual
1 / 2.64 1 / 2.98
9 / 3 10 / 4
Fixed Removable
Fully enclosed single reduction Fully enclosed single reduction
As optional equipment As optional equipment
Fixed Fixed
Wheels adjustable in height by crank handle Wheels adjustable in height by crank handle
15 x 6.00 - 6 16 x 6.50 - 8
3-point Cat. 1 and 2 3-point Cat. 1 and 2
Pivoting Pivoting
As optional equipment
15 / 20 19 / 25
As optional equipment As optional equipment
286 474