DC soil pre-looseners and soil looseners silhouette

Robust and compact soil looseners

DC soil looseners are efficient and effective at loosening soil.

Find a dealer near you

DC soil looseners are part of the KUHN tillage range. Efficient and robust, these machines will meet your needs for conventional farming and minimum tillage practices.
The DC meets the needs of the operators: working efficiency, simple adjustments, reduced maintenance and longevity of use.
This soil loosener is an accurate and reliable agronomic tool, by bringing effective loosening deep down.
The DC is a versatile and innovative tool that will allow you to increase your potential yields and optimise your financial income.
DC soil looseners at work

Your benefits

A quality agronomic work

Representative drawings of the DC soil loosener at work

Agronomic advantages

The DC soil loosener combines work efficiency and respect for the soil with the wave effect it creates, which effectively loosens the soil without disrupting the surface. The angled point avoids the creation of fine tilth and helps improve the soil structure and moisture retention.
The improved soil structure creates an optimal environment for root development as well as improving the load bearing capacity of the soil.

Use in solo or in combination

The DC can be used in solo or in combination with one or more machines. In solo, you can equip your soil loosener with a roller to control the working depth from 10 to 35 cm. It can be quickly adapted for different uses, from loosening after stubble cultivation to breaking a ploughpan for example.
When using the DC in combination with a power-harrow for example, you will save time and fuel by loosening the soil at depth and preparing your seedbed simultaneously.
View of the DC soil loosener in solo and in combination with a power harrow and seed drill

Adapability is key

The DC soil loosener can be adapted to your needs. The spacing of the teeth (50 or 70 cm) and the width of the share (45 cm or 28 cm) will allow you to perform shallow and deeper work.
Carbide hard facing has been incorporated into parts such as the tips, wings and the legs. This leads to a very long life, better penetration capacity in hard soils and good working stability. The points and wings can also be equipped with tungsten carbide inserts to ensure maximum service life.
The compactness of the DC soil loosener in transport mode

Unlock potential yields

Simple adjustment of the working depth

Simple and precise adjustments

The connection between the DC and the rear implement is composed of straight and adjustable lower arms and short top link for easy and quick coupling of the two machines. This geometry creates a well balanced combination.
This system benefits from a centralised adjustment of the working depth and angle, this makes it possible to adapt to all situations.

Points for all applications

The profiled leg on the DC soil loosener has been designed to avoid disturbance of the soil in front of the legs. Its specific angle, combined with the symmetrical positioning of the points and wings, ensures uniform lifting and loosening across the working width.
As an option, a tungsten carbide points and wings are available for maximum wear resistance. It is advisable not to use this option if there are large stones anchored in the soil. Two choices of shares / wings:
  • 280 mm wide for deep work, heavy clay or stony soils
  • 450 mm wide for working depths of less than 25 cm deep, silty, silty clay, clay-limestone soils and lighter land.
Working angle of the shares of the KUHN DC soil loosener

Essential and optional equipment

KUHN makes the equipment available to meet your applications.
First of all, the equipment required so you can work in combination with another implement. There's a choice of coupling arms for HR power-harrows and EL tillers and long transmissions. For working in solo, a Maxicage or Maxipacker roller is required.
Then, In terms of optional equipment, lateral control wheels can increase working stability when used in combination. A complete leg can be added as an option and a hydraulic hose extension may also be required when combined with EL tillers or HR power-harrows or when using a VENTA or INTEGRA type seed drills.
DC equipped with a KUHN rotary tiller

Compact and robust

Stationary view of a DC 301 soil loosener

The DC frame

The range of DC soil looseners have a common central frame consisting of a 160x160 mm beam, and extensions on the 4.00 m machine.
Another advantage of its design is its easy adaptability to implements coupled to the rear of the DC. The rear hooks and the top link are as close as possible to the rear of the DC. This provides a extremely compact machine during transport and manoeuvres. The legs have a shear bolt safety, so they pivot out of the way in the event that an obstacle is encountered.

High capacity front coupling

The triangular design and the large section steel profiles (160x160 mm) provide great robustness. The very robust clevis design and the multiple attachment points offer great capacity in terms of coupling. The attachement is compatible with Category 2 or 3.
Rear view of the soil loosener coupled to a tractor

Example of compactness of the DC soil loosener in transport mode